TecTite
 

TecTite

   

IAPMO cUPC® listed, File number 4951, and meets both the UPC and IPC plumbing codes.

ASTM B88 Tube Types – K, L, M drawn (hard) copper tube and annealed (soft) copper tube in 1/2″ to 1″ Nominal Sizes.

CPVC water tube per ASTM D2846/2846M-99.

PEX water tube that meets the requirements of ASTM F876, F877 using a tube liner as provided by EPC.

Approved Applications – Potable water, hot water heating, chilled water systems within the pressure – temperature rating stated below. TECTITE fittings can be utilized in underground applications, and as manufactured joints, behind walls without access panels. Local code officials and or plumbing inspectors should be consulted to insure underground installations are in compliance with local plumbing regulations.

Other applications? Contact a CB Supplies representative for application specific information.

Note – plumbing systems must be in installed in compliance with local plumbing codes.

TecTite™

Introducing TecTite™ from Elkhart Products Corporation

TecTite joins the growing list of quality EPC products

As part of its commitment to provide products that meet the changing needs of specifiers and installers, Elkhart Products Corporation has added to its expanding “PUSH” line. CB Supplies is the proud exclusive supplier of TecTite push fittings in the Canadian market.

TecTite provides easier, faster and more cost-effective jointing solutions. The fittings simply push together in seconds to create a perfect joint. No torches and no solder are required. TecTite fittings are removable, using a TecTite removal tool available from EPC (distributed through CB Supplies in Canada). In addition, the fittings are reusable, following our new fitting installation procedures.

Benefits extend well beyond installation technique, allowing for the jointing of copper tubing, PEX and CPVC pipe.

Clean, easy and efficient.
The jointing process is simple: no special tools, no flux, no solder, no flame. No problem! TecTite offers an energy-efficient, safe, cost-effective installation.

TecTite fittings are designed to join Copper and CPVC tube in the 1/2″ to 1″ size range, and PEX tubing in the 1/2″ to 1″ size range (requires a tube liner).
The benefits: lower costs, reduced labor time and an efficient installation process!

Superb performance.
TecTite fittings are perfect for potable water, hot water heating, and chilled water systems within the pressure/temperature rating.

The o-ring in all TecTite fittings is manufactured from ethylene propylene diene monomer (EPDM) and is supplied lubricated for easy tube insertion. Fittings are produced from either gunmetal (which is immune to dezincification), A-metal or DZR brass (which are both resistant to dezincification).

Like all Elkhart Products Corporation pipe fitting products, TecTite fittings are designed and manufactured with the highest quality possible. TecTite fittings go above and beyond to meet the latest industry standards.

Perfect fit. Perfect warranty.
TecTite fittings carry a 50-year-warranty against manufacturing defects. Contact an EPC representative for details. All warranties are subject to following good installation practices. The installation manual provides comprehensive details.

For more product information, please visit www.elkhartproducts.com.